Fuel Pressure Release
- Disconnect electrical connector for electric fuel pump. See FUEL PUMP ELECTRICAL CONNECTOR LOCATION table. Electric fuel pump is located in the fuel tank.FUEL PUMP ELECTRICAL CONNECTOR LOCATION
Application Connector Location Camry, Celica & Corolla Under Cover Plate, Below Rear Seat RAV4 Under Cover Plate, Below Driver's Side Rear Seat Tacoma On Top Of Fuel Tank, At Fuel Pump Tercel Under Cover Plate, Below Rear Seat T100 On Top Of Fuel Tank, Near Fuel Pump 4Runner On Top Of Fuel Tank, At Fuel Pump - Start engine and allow engine to idle until engine stalls. Turn ignition off. Disconnect negative battery cable.
- Place suitable container under fuel line connection. Cover fuel line connection with shop towel. Slowly loosen fuel line connection, allowing fuel pressure to be released. Once fuel pressure is released, fuel system components may be serviced.