LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1998 >> Tercel Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing - 4-CYL >> Ignition Checks (DISTRIBUTORLESS Ignition System) >> Camshaft Position Sensor Resistance >> RAV4
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Position Sensor Resistance: RAV4

  1. Disconnect electrical connector from camshaft position sensor. Camshaft position sensor is located at timing belt end of cylinder head, on the firewall side of the engine. See Figure-32. Using ohmmeter, check resistance between electrical terminals on camshaft position sensor.
  2. Ensure camshaft position sensor resistance is within specification. See CAMSHAFT POSITION SENSOR RESISTANCE  table. Replace camshaft position sensor if resistance is not within specification. See REMOVE/INSTALL/OVERHAUL article. Reinstall electrical connector on camshaft position sensor.
scientia non olet · About LEMON Manuals