Engine Controls - Sensor Operating Range Charts: Introduction

NOTE: On MR2, article applies to 2000 and 2001 models. On all other models, article applies only to 2001 models.

NOTE: Before using sensor operating range information, check for any related Technical Service Bulletins (TSBs).

Sensor operating range information can help determine if a sensor is out of calibration. An out-of-calibration sensor may not set a diagnostic trouble code, but it may cause driveability problems.

NOTE: Unless stated otherwise in test procedure, perform all voltage tests using a Digital Volt-Ohmmeter (DVOM) with a minimum 10-megohm input impedance.