Section 249 (Generators & Regulators): Overhaul: Generator: Assembly
WARNING: This page is about a different car, the 2004 Lexus LS 430 and 2003 Lexus LS 430. However, it is still accessible from the selected car via links, so may be relevant.
To assemble, reverse disassembly procedure. Use generator Pulley Set Nut Wrench Set (SST 09820-63010) to install generator pulley. Place SST "C" securely into a vise. Install SST "A" and "B" and generator into SST "C". See Figure. Tighten pulley nut in the opposite direction of disassembly. See TORQUE SPECIFICATIONS . Using 29 mm socket, slowly press in coil assembly. To complete assembly, reverse disassembly procedure. After completing assembly, verify rotor turns smoothly.