Fluid Capacities (MR2)

FLUID CAPACITIES (MR2)

Application

⁽¹⁾ Quantity

Cooling System (Includes Heater)

11.0 Qts. (10.4L)

Crankcase (Includes Filter) ⁽²⁾

3.9 Qts. (3.7L)

Manual Transaxle (SAE 75W-90/API GL-5)

With Limited Slip Differential (LSD)

1.9 Qts. (1.8L)

Without Limited Slip Differential (LSD)

2.0 Qts. (1.9L)

Sequential Manual Transaxle Reservoir Fluid

2001 Models ⁽³⁾

⁽⁴⁾

Power Steering Fluid (Toyota Power Steering Fluid EH)

.63 Qt. (.60L)

⁽¹⁾	Approximate quantity is listed.

⁽²⁾	Use an API SJ energy conserving engine oil.

⁽³⁾

There are 2 types of manual transaxles used. A standard type manual transaxle and a sequential manual transaxle. A standard type manual transaxle is a common transaxle in which the driver operates the clutch and shifts the transaxle. A sequential manual transaxle is an electronic controlled manual transaxle in which the clutch is operated and transaxle is shifted hydraulically by moving the shift lever forward or backward. The sequential manual transaxle may be identified by the shift lever pattern and uses a special fluid in the fluid reservoir. Shift lever pattern consists of "R", "N", "S" and "+" in place of the conventional type shift lever pattern and no clutch pedal is used.

⁽⁴⁾	Capacity is not available from manufacturer. Use only Sequential M/T Fluid (08886-02206).