LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2002 >> Land Cruiser >> Repair and Diagnosis >> General Information >> Computer Relearn Procedures - Import >> MAZDA >> Reprogram Error Recovery
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Reprogram Error Recovery

  1. Using first key, start engine. After SECURITY light illuminates for 1-2 seconds, turn first key to LOCK position. Using first key, turn ignition switch to ON position, then LOCK position 5 times. DO NOT leave key in either position for more than one second.
  2. Using first key, turn ignition switch to ON position. SECURITY light should illuminate. Turn first key to LOCK position and remove key. SECURITY light should go out.
  3. Using second key, start engine. SECURITY light should illuminate for 1-2 seconds and engine should continue to run. Turn second key to LOCK position and remove key.
  4. Repeat step  3 with first key. Repeat step  3 with third key, then with each new key, up to 8 keys total. Waiting seconds will cause program to quit automatically. After reprogramming is complete, clear DTCs with NGS tester.
scientia non olet · About LEMON Manuals