Programming When Replacing Transponder Key Electronic Control Unit
WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2003 Toyota Tundra, 2003 Toyota Tacoma, 2003 Toyota Sienna, 2003 Toyota Sequoia, and 2003 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
Once replacement transponder key Electronic Control Unit (ECU) is installed, register ignition keys to transponder key ECU. See IGNITION KEY REGISTRATION . Insert ignition key into ignition lock cylinder and turn ignition switch to ON position. Leave ignition switch in ON position for at least 30 minutes and then start the engine.