Intermittent Problems Check (Hand-Held Tester Only)

By putting the vehicle's ECM in the check mode, one-trip detection logic is possible instead of 2-trip detection logic and sensitivity to detect open circuits is increased. This makes it easier to detect intermittent problems.

1. Clear the DTC. See CLEARING DIAGNOSTIC TROUBLE CODES .
2. Set the check mode. See CHECK MODE DTC RETRIEVAL (HAND-HELD TESTER ONLY)  under RETRIEVING DIAGNOSTIC TROUBLE CODES.
3. Simulate the conditions of the malfunction described by customer
4. Check the connector and terminal.
5. Handle the connector.