Land Cruiser
- Connect hand-held tester to data link connector No. 3. When using hand-held tester, more detailed procedures may be displayed on tester while performing this procedure.
- Insert registered master key in ignition lock cylinder. Turn ignition on. Select key deletion from hand-held tester. Ensure SECURITY indicator light is on. SECURITY indicator light is displayed as a vehicle icon near the center of the tachometer.
- Within 10 seconds of completing hand-held tester operation, remove master key from ignition lock cylinder. SECURITY indicator light should flash ON and OFF in 1 second intervals. Procedure is now complete and transponder key code should now be erased. SECURITY indicator light should begin flashing signaling normal operation of immobilizer system.