Fail-Safe Mode Chart
If any of following codes are recorded, engine control module (ECM) enters fail-safe mode. See IDENTIFYING FAIL-SAFE MODE CHART table.
IDENTIFYING FAIL-SAFE MODE CHART
| DTC No. | Fail-Safe Operation | Fail-Safe Deactivation Conditions |
|---|---|---|
| P0100 | Ignition Timing Fixed At 10° BTDC | Returned To Normal Condition |
| P0110 | Intake Air Temperature Fixed At 68°F (20°C) | Returned To Normal Condition |
| P0115 | Engine Coolant Temperature Fixed At 176°F (80°C) | Returned To Normal Condition |
| P0120 | VTA Fixed At 0° | Following Condition Is Repeated At Least 2 Times Consecutively When Closed Throttle Position Switch Is OFF: VTA Is Greater Than Or Equal To 0.1 V & Less Than Or Equal To 0.95 V |
| P0135 & P0141 | Abnormal Heater Circuit Is Turned Off | Ignition Switch OFF |
| P0325 | Max. Timing Retardation | Ignition Switch OFF |
| P1300, P1305, P1310 & P1315 | Fuel Cut | Returned To Normal Condition |
| P1656 | It Cut Electrically Abnormal Circuit | Returned To Normal Condition |