LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2003 >> Matrix Base, FWD, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Diagnostic Procedures - 4-Cylinder >> Ignition Systems >> Crankshaft Position Sensor >> RAV4
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Crankshaft Position Sensor: RAV4

  1. Disconnect crankshaft position sensor electrical connector located near front of engine. See Figure. Crankshaft position sensor is located on timing chain cover, near crankshaft pulley.
  2. Using ohmmeter, check resistance between electrical terminals on crankshaft position sensor electrical connector. Ensure crankshaft position sensor resistance is within specification. See CRANKSHAFT POSITION SENSOR RESISTANCE  table. Replace crankshaft position sensor if resistance is not within specification. See CRANKSHAFT POSITION SENSOR under IGNITION SYSTEMS in REMOVAL & INSTALLATION - 4-CYLINDER article. Reinstall crankshaft position sensor electrical connector.
scientia non olet · About LEMON Manuals