Additional Master Key Registration (Except PRIUS): Sequoia
NOTE:
Using the procedure below, it is possible to register up to 4 master key codes and up to 2 sub-key codes including already registered master key and sub-key.
NOTE:
Perform the following operation when registering an additional master key or sub-key.
- Ensure all doors are closed and there is no key in ignition lock cylinder.
- Insert registered master key in ignition lock cylinder. Turn ignition switch from LOCK position to ON position 5 times within 15 seconds.
- With completion of ignition operation, open and close driver side door 6 times within 20 seconds.
- With completion of closing driver door for final time, remove registered master key from ignition lock cylinder within 10 seconds.
- When registered master key is removed from ignition lock cylinder, insert key to be registered in ignition lock cylinder within in 10 seconds.
- Turn ignition switch to ON position for 60 seconds or more. After 60 second period, remove master key. If registering additional master keys, repeat process starting with step 5 within 10 seconds. If not registering additional master keys, open and close driver door within 10 seconds or more after master key is removed.