October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Starter Relay Test
- Locate and remove starter relay. Starter relay is marked "ST". Using ohmmeter, verify continuity between relay terminals No. 1 and 2. See Fig 1. Continuity should not exist between terminals No. 3 and 5. If continuity is not as specified, replace relay.
- Check relay operation by applying battery voltage through terminals No. 1 and 2. See Fig 1. Continuity should now exist between terminals No. 3 and 5. If relay does not test as indicated, replace relay.
- If OK, reinstall starter test relay.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002