Typical Enabling Conditions: Notes
TYPICAL ENABLING CONDITIONS
| Monitor runs whenever these DTCs not present | See LIST OF DISABLE A MONITOR |
| EVAP key-off monitor runs when all of following conditions met | - |
| Atmospheric pressure | 525 to 825 mmHg (70 to 110 kPa) |
| Battery voltage | 10.5 V or more |
| Vehicle speed | Below 2.5 mph (4 km/h) |
| Ignition switch | OFF |
| Engine condition | Not running |
| FTP sensor malfunction (P0450, P0451, P0452 and/or P0453) | Not detected |
| Purge VSV | Not operated by scan tool |
| Vent valve | Not operated by scan tool |
| Leak detection pump | Not operated by scan tool |
| Both of following conditions met before IG switch OFF | Conditions 1 and 2 |
| 1. Duration that vehicle driven | 5 minutes or more |
| 2. Purge flow | Executed |
| ECT | 4.4 to 35°C (40 to 95°F) |
| IAT | 4.4 to 35°C (40 to 95°F) |
| Time after engine stopped | 5 hours |
Example of restart time
RESTART TIME
| First time | 7 hours |
| Second time | 9 hours and 30 minutes |