Torque Specification
2AZ-FE:
ENGINE CONTROL TORQUE SPECIFICATION (2AZ-FE)
| Part Tightened | N.m | kgf.cm | ft.lbf |
|---|---|---|---|
| Throttle body assy x Intake manifold | 30 | 306 | 22 |
| Knock sensor x Cylinder block sub-assy | 20 | 199 | 14 |
| Intake manifold x Cylinder head sub-assy | 30 | 306 | 22 |
| ECM x Instrument panel reinforcement | 5.5 | 56 | 49 in..lbf |
| ECM x Blower assy | 5.5 | 56 | 49 in..lbf |
| Accelerator pedal rod assy x Body | 7.5 | 76 | 66 in..lbf |
1MZ-FE/3MZ-FE:
ENGINE CONTROL TORQUE SPECIFICATION (1MZ-FE/3MZ-FE)
| Part Tightened | N.m | kgf.cm | ft.lbf |
|---|---|---|---|
| Front suspension upper brace center x Body (w/ Performance Rod) | 80 | 815 | 59 |
| V-bank cover sub-assy x Cylinder head cover sub-assy LH | 7.9 | 81 | 70 in..lbf |
| Throttle body assy x Intake air connector | 11 | 112 | 8 |
| Air cleaner cap sub-assy x Air cleaner case sub-assy | 5.0 | 51 | 44 in..lbf |
| Knock sensor x Cylinder block sub-assy 1MZ-FE | 39 | 398 | 29 |
| Knock sensor x Cylinder block sub-assy 3MZ-FE | 20 | 199 | 14 |
| Water outlet x Cylinder head sub-assy | 15 | 153 | 11 |
| Water outlet x Cylinder head LH | 15 | 153 | 11 |
| Intake manifold x Cylinder head sub-assy | 15 | 153 | 11 |
| Intake manifold x Cylinder head LH | 15 | 153 | 11 |
| Ground cable x Intake manifold | 8.4 | 86 | 74 in.lbf |
| ECM x Instrument panel reinforcement | 5.5 | 56 | 49 in.lbf |
| ECM x Blower assy | 5.5 | 56 | 49 in.lbf |
| Accelerator pedal rod assy x Body | 7.5 | 76 | 66 in.lbf |