Accelerator Pedal ASSY (1ZZ-FE): Replacement

DISCONNECT BATTERY NEGATIVE TERMINAL
REMOVE ACCELERATOR PEDAL ASSY
1. Disconnect the accelerator position sensor connector.
2. Remove the 2 bolts, then remove the accelerator pedal.
Fig 1: Removing 2 Bolts And Accelerator Pedal
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL ACCELERATOR PEDAL ASSY
1. Install the accelerator pedal with the 2 bolts.
  Torque: 5.4 N.m (55 kgf.cm, 48 In. lbf)
2. Connect the accelerator position sensor connector.
Fig 2: Installing Accelerator Pedal With 2 Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT BATTERY NEGATIVE TERMINAL
Torque: 5.4 N.m (55 kgf.cm, 48 in..lbf)