VVT Sensor (3MZ-FE): Replacement

HINT:

A bolt without a torque specification is shown in the standard bolt chart (see SPECIFIED TORQUE FOR STANDARD BOLTS ).

1. REMOVE AIR CLEANER ASSY 
   Fig 1: Removing VVT Sensor

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. REMOVE VVT SENSOR 
   1. Disconnect the sensor connector.
   2. Remove the bolt and sensor.
3. INSTALL VVT SENSOR 
   1. Apply a light coat of engine oil to a new O-ring. Install the O-ring onto the sensor.
   2. Install the sensor with the bolt.

      Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf) 

   3. Connect the sensor connector.
4. INSTALL AIR CLEANER ASSY (See  REPLACEMENT  )