Throttle Body: Installation

INSTALL THROTTLE BODY
1. Connect the water bypass hose to the manifold thermostat on the throttle body.
  
  Fig 1: Connecting Water Bypass Hose To Manifold Thermostat
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install a new gasket and the throttle body with the 2 bolts and the 2 nuts.
  Torque: 18 N.m (185 kgf.cm, 13 ft.lbf)
3. Connect the water bypass hose and the PCV hose to the throttle body.
  
  Fig 2: Connecting Water Bypass Hose & PCV Hose To Throttle Body
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Connect the throttle control connector.
INSTALL INTAKE AIR CONNECTOR
FILL WITH ENGINE COOLANT (See REPLACEMENT )
START ENGINE AND CHECK FOR ENGINE COOLANT LEAKS
INSTALL V-BANK COVER