LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2005 >> MR2 C65M >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Engine Ignition System >> IGNITION RELAY (No. 2) >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

IGNITION RELAY (No. 2): Inspection

  1. REMOVE IGNITION RELAY (Marking: IG2) 
    Fig 1: Removing Ignition Relay
    G02631187Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT IGNITION RELAY 
    1. Inspect the resistance.
      1. Using an ohmmeter, measure the resistance between the terminals.

      Standard: 

      IGNITION RELAY TEST CONDITION TABLE

      Tester Connection Specified Condition
      3-5 10 kΩ or higher
      3-5 Below 1 Ω
      (Apply battery voltage to terminals 1 and 2)
      Fig 2: Measuring Resistance Between Terminals Of Ignition Relay
      G02631188Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the resistance is not as specified, replace the relay.

  3. REINSTALL IGNITION RELAY 
scientia non olet · About LEMON Manuals