Throttle Body: Installation

INSTALL THROTTLE BODY
1. Install a new gasket on the intake manifold, as shown.
  
  Fig 1: Installing Gasket On Intake Manifold
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the throttle body, bracket and fuel hose clamp with the 4 bolts.
  Torque: 30 N.m (305 kgf.cm, 22 ft.lbf)
  
  Fig 2: Installing Throttle Body, Bracket & Fuel Hose Clamp With Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the 5 hoses to the throttle body.
4. Connect the throttle position sensor & control motor connector.
INSTALL AIR CLEANER HOSE
INSTALL AIR CLEANER ASSEMBLY WITH MAF METER AND BRACKET
FILL RADIATOR WITH ENGINE COOLANT