Charging System: Generator: Installation

INSTALL GENERATOR ASSEMBLY
1. Install the bracket with the bolt.
  Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf)
2. Install the wire harness clamp stay.
  Torque: 8.4 N*m (86 kgf*cm, 74 in.*lbf)
3. Install the generator assembly with the 2 bolts.
  Torque: 43 N*m (438 kgf*cm, 32 ft.*lbf)
4. Install the nut to the cylinder block.
  Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf)
5. Connect the generator connector to the generator assembly.
6. Install the generator wire with the nut.
  Torque: 9.8 N*m (100 kgf*cm, 87 in.*lbf)
7. Install the terminal cap.
8. Connect the wire harness clamp.
INSTALL FAN AND GENERATOR V BELT (See step 69 under INSTALLATION )
INSTALL V-BANK COVER SUB-ASSEMBLY (See step 14 under INSTALLATION )
CONNECT BATTERY NEGATIVE TERMINAL
PERFORM INITIALIZATION
1. Some systems need initialization when disconnecting the battery terminal.