Fail-Safe Chart
If any of the following DTCs are set, the ECM enters fail-safe mode to allow the vehicle to be driven temporarily.
FAIL-SAFE CHART
| DTCs | Components | Fail-Safe Operations | Fail-Safe Deactivation Conditions |
|---|---|---|---|
| P0031 P0032 P0037 P0038 |
Heated Oxygen (HO2) Sensor Heater | ECM turns off HO2 sensor heater. | Ignition switch OFF |
| P0100 P0102 P0103 |
Mass Air Flow (MAF) Meter | ECM calculates ignition timing according to engine speed and throttle valve position. | Pass condition detected |
| P0110 P0112 P0113 |
Intake Air Temperature (IAT) Sensor | ECM estimates IAT to be 20°C (68°F). | Pass condition detected |
| P0115 P0117 P0118 |
Engine Coolant Temperature ECT) Sensor | ECM estimates ECT to be 80°C (176°F) | Pass condition detected |
| P0120 P0122 P0123 |
Throttle Position (TP) Sensor | ECM cuts fuel intermittently. | Pass condition detected and ignition switch OFF |
| P0121 | TP Sensor | ECM cuts fuel intermittently | Pass condition detected and ignition switch OFF |
| P0325 P0327 P0328 |
Knock Sensor | ECM sets ignition timing to maximum retard. | Ignition switch OFF |
| P0352 P0353 P0354 |
Ignition Coil with Igniter | ECM cuts fuel. | Pass condition detected |