LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2006 >> Prius >> Repair and Diagnosis >> Engine Performance >> Engine Control System (1NZ-FXE) >> Camshaft Position Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Position Sensor: Installation

  1. INSTALL CAMSHAFT POSITION SENSOR 
    1. Install the sensor with the bolt.

      Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf) 

    2. Connect the sensor connector.
  2. INSTALL INVERTER WITH CONVERTER 
    1. Install the inverter with converter (see INSTALLATION ).
  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  4. ADD HV COOLANT (See  COOLANT  ) 
  5. ADD ENGINE COOLANT (See  ON-VEHICLE INSPECTION  ) 
  6. CHECK FOR ENGINE COOLANT LEAKS (See  ON-VEHICLE INSPECTION  ) 
  7. CHECK FOR HV COOLANT LEAKS 
  8. INSTALL RADIATOR SUPPORT OPENING COVER (See  INSTALLATION   ) 
  9. INSTALL ENGINE UNDER COVER RH 
  10. INSTALL ENGINE UNDER COVER LH 
  11. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
scientia non olet · About LEMON Manuals