LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2006 >> Prius >> Repair and Diagnosis >> General Information >> Towing >> Introduction >> Repair Instruction >> Customize Parameters
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Customize Parameters

HINT:

The following items can be customized.

NOTE:
  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Be sure to make a note of the current settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to the default setting.
  1. Air conditioning amplifier 
    CUSTOMIZE PARAMETERS

    Display (Item) Default Contents Setting
    SET TEMP SHIFT (Set Temperature Shift) NORMAL To control with the shifted temperature against the display temperature. +2C / +1C / NORMAL / -1C / -2C
    AIR INLET MODE (Air Inlet Mode) AUTO In case of turning the A/C ON when you desire to make the compartment cool down quickly, this is the function to change the mode automatically to RECIRCULATED mode. MANUAL / AUTO
    COMPRESSOR MODE (Compressor Mode) AUTO Function to turn the A/C ON automatically by pressing the AUTO button when the blower is ON and the A/C is OFF. MANUAL / AUTO
    COMPRS/DEF OPER (Compressor/Air inlet DEF operation) LINK Function to turn the A/C ON automatically linking with the FRONT DEF button when the A/C is OFF. NORMAL / LINK
    FOOT/DEF MODE (Foot/DEF auto mode) ON Function to turn the air flow from FOOT/DEF to ON automatically when AUTO MODE is ON. OFF / ON
    AUTO BLOW UP (Foot/DEF automatic blow up function) ON Function to switch the blower level automatically when the defroster is ON. OFF / ON
    FOOT AIR LEAK (Foot air leak) ON Function to cut off the airstream felt underfoot while the vehicle is moving. OFF / ON
    AMBINT TMP SFT (Ambient Temperature Shift) NORMAL To control with the shifted ambient temperature against the display ambient temperature. +3C / +2C / +1C / NORMAL / -1C -2C / -3C
  2. Illuminated entry 
    AMBIENT TEMPERATURE SHIFT

    Display (Item) Default Contents Setting
    LIGHTING TIME 15 s Changes lighting time after closing doors (light quickly fades out when power switch is turned ON (IG) 7.5 s / 15 s / 30 s
    I/L AUTO OFF ON Illumination AUTO OFF ON function to turn off interior light automatically after specified time for prevent the battery loss when the interior light switch is "DOOR" position and the door is open ON / OFF
    I/L ON/UNLOCK ON Function to light interior light, etc. when the door is unlocked with a transmitter, door key or door lock control switch ON / OFF
    I/L ON/ACC OFF ON Illuminates interior light when power switch is turned from the ON (ACC) to ON (IG) position ON / OFF
  3. Smart key system 
    SMART KEY SYSTEM REFERENCE

    Display (Item) Default Contents Setting
    SMART WARN 1 (Warns if key is taken from D-door with P position) ON Function that warns driver that key is taken out from driver's door when shift position is P and power switch is not OFF ON / OFF
    SMART WARN 2 (Warns if key is taken from D-door without P position) ON Function that warns driver that key is taken out from driver's door when shift position is not P and power switch is not OFF ON / OFF
    SMART WARN 3 (Warns if key is taken out by other passengers) ON Function that warns driver that key is taken out from front passenger's door by passenger when power switch is not OFF ON / OFF
    SMART BUZ NUM (Sets number of warning buzzer sounds) 3 TIMES Function that sets number of warning buzzer sounds when key is taken out of vehicle OFF / 3TIMES / 5TIMES / 7TIMES
    SMART WARN 4 (Warning time for locking door when engine is idling) 2s Function that sets warning time for locking doors while engine is idling OFF / 1s / 2s
    SMART WARN 5 (Warning when key is left in vehicle) 2s Function that sets warning time for locking doors while key is inside vehicle OFF / 1s/ 2s
    SMART WARN 6 (Warning if starting engine when key is out of detection range) ON Function that warns driver that entry ignition control is being attempted to be activated while key is out of detection range ON / OFF
    KEY LOW-BATT WRN (Warning when key battery becomes weak) ON Function that warns driver that key's battery power is low ON / OFF
    SMART UNLOCK (Entry door unlock mode) EACH Function that makes entry unlock operation available. ALL / EACH / D-door
    TRANSMIT INTVAL (Transmission interval) 0.3s Function that sets entry signal transmission intervals when vehicle is stopped and key is outside vehicle 0.15s / 0.3s / 0.45s / 0.6s
    PARK WAIT TIME (Waiting time to permit door opening of door after locking) 3.0s Function that sets waiting time to permit opening door after door is locked with entry lock function 0.5s / 1.5s / 2.5s / 5s
    SMART BACK DOOR (Back door opening operation when vehicle is locked) LONG Function that enables back door to open when key is inside luggage room LONG / TWICE / OFF
  4. Wireless door lock control system 
    WIRELESS DOOR LOCK CONTROL SYSTEM REFERENCE

    Display (Items) Default Contents Setting
    OPEN DOOR WARN (Door ajar warning function ON If door is not completely closed and transmitter LOCK switch is pressed, this function sounds buzzer for 10 seconds ON / OFF
    WIRLS BUZZ OPER (Buzzer answer-back for wireless door lock operation) ON Function that makes wireless buzzer sound for answer-back when transmitter LOCK/UNLOCK switch is pressed ON / OFF
    ALARM FUNCTION (Panic function) ON Function that operates theft deterrent alarm when transmitter PANIC switch transmitter is held 0.8 seconds. ON / OFF
    UNLOCK/2OPER (Wireless unlock operated twice) ON Function that unlocks driver side door when UNLOCK switch on transmitter is pressed once, and unlocks all doors when pressed twice. If set to OFF, pressing UNLOCK switch once unlocks all doors. ON / OFF
    AUTO LOCK DELAY (Auto lock time) 30s This function controls amount of time from unlocking doors to automatic re-locking function 30s / 60s
    HAZARD ANS BACK (Hazard answer-back for wireless door lock operation) ON When LOCK switch on transmitter is pressed, this function illuminates all hazard warning lights once. When UNLOCK switch is pressed, all hazard warning lights illuminate twice ON / OFF
  5. Theft deterrent system 
    THEFT DETERRENT SYSTEM REFERENCE

    Display (Items) Default Contents Setting
    PASSIVE MODE (Passive arming mode) OFF PASSIVE MODE is a function that switches theft deterrent system from arming preparation state to armed state 30 seconds after key is removed from key slot and all doors is closed, even if doors are not locked by wireless or door key lock operation.
    In PASSIVE MODE, theft deterrent system will judge that a theft is taking place and switch to alarm sounding state if one of the following operations are not performed within 14 seconds (see ENTRY DELAY below) after door is opened:
    • Unlock any door by key or wireless operation
    • Reconnect battery
    • Insert key into key slot and turn power switch ON (IG)
    		 ON / OFF
    WARN BY HORN (Warning by horn) ON Function that allows vehicle horn and theft deterrent horn to be able to be used and a warning device ON / OFF
    ENTRY DELAY (Entry delay time) 14 s Function that changes entry delay time (time before warning states) 0 s/14 s/ 30 s
    WARN BY GLS SEN (Warning by glass broken sensor) ON Function that turns glass broken sensor ON/OFF ON / OFF
scientia non olet · About LEMON Manuals