General Maintenance

HINT:

Inspect these items on a cooled down engine.

1. INSPECT DRIVE BELT 
   DRIVE BELT REFERENCE CHART
   
   

   Type	See procedures
   1ZZ-FE	See ON-VEHICLE INSPECTION

2. REPLACE ENGINE OIL AND OIL FILTER 
   ENGINE OIL AND OIL FILTER REFERENCE CHART
   
   

   Type	See procedures
   1ZZ-FE	See OIL AND OIL FILTER

3. REPLACE ENGINE COOLANT 
   ENGINE COOLANT REFERENCE CHART
   
   

   Type	See procedures
   1ZZ-FE	See ON-VEHICLE INSPECTION

4. INSPECT EXHAUST PIPES AND MOUNTINGS 
   1. Visually check the pipes, hangers and connections for severe corrosion, leaks or damage.
5. INSPECT SPARK PLUGS 
   SPARK PLUGS REFERENCE CHART
   
   

   Type	See procedures
   1ZZ-FE	See INSPECTION

6. INSPECT BATTERY 
   BATTERY REFERENCE CHART
   
   

   Type	See procedures
   1ZZ-FE	See ON-VEHICLE INSPECTION

7. INSPECT AIR CLEANER FILTER 
   1. Remove the air filter.
   2. Visually check that the air filter is not excessively damaged or oily. If necessary, replace the air filter.
   3. Reinstall the air filter.
   Fig 1: Inspecting Air Cleaner Filter

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
8. REPLACE AIR CLEANER FILTER 
   1. Replace the air filter with a new one.
9. INSPECT FUEL TANK CAP GASKET 
   FUEL TANK CAP GASKET REFERENCE CHART
   
   

   Type	See procedures
   1ZZ-FE	See INSPECTION

10. INSPECT FUEL LINES AND CONNECTIONS AND FUEL TANK VAPOR VENT SYSTEM HOSES AND FUEL TANK BANDS 
    1. Visually check the fuel lines for cracks, leakage, loose connections, deformation or tank band looseness.
11. INSPECT CHARCOAL CANISTER 
    CHARCOAL CANISTER REFERENCE CHART
    
    

    Type	See procedures
    1ZZ-FE	See INSPECTION

12. INSPECT VALVE CLEARANCE