Accelerator Pedal: Inspection

INSPECT ACCELERATOR PEDAL ASSEMBLY

Check the resistance.
1. Using an ohmmeter, measure the resistance between the terminals.

Standard resistance

TESTER CONNECTION SPECIFIED CONDITION

Tester Connection	Specified Condition
3 (EP1) - 6 (VCP1)	1.5 to 6.0 kΩ
1 (EP2) - 4 (VCP2)	1.5 to 6.0 kΩ

If the result is not as specified, replace the accelerator pedal.

Fig 1: Checking Accelerator Pedal Assembly Resistance

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.