Engine Control System (1ZZ-FE): ECM: Installation

1. Install the ECM bracket No. 3 with the 2 screws.

Torque: 3.2 N*m (33 kgf*cm, 28 in.*lbf) 

Fig 1: Locating ECM Bracket No. 3 Screws (Denso Made)

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

1. Install the ECM bracket No. 2 with the 2 screws.

Torque: 3.2 N*m (33 kgf*cm, 28 in.*lbf) 

Fig 2: Locating ECM Bracket No. 2 Screws (Denso Made)

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

1. Install the ECM bracket No. 1 with the 2 screws.

Torque: 3.2 N*m (33 kgf*cm, 28 in.*lbf) 

Fig 3: Locating ECM Bracket No. 1 Screws (DENSO Made)

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

1. Install the ECM bracket No. 1 with the 4 screws.
   Fig 4: Locating ECM Bracket No. 1 Screws (DELCO Made)

   Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Torque: 3.2 N*m (33 kgf*cm, 28 in.*lbf) 

1. Install a new ECM cover onto the ECM as shown in the illustration.

Fig 5: Identifying ECM Cover (Denso And Delco Made)

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

1. Install the ECM with the 2 screws.

   Torque: 3.0 N*m (31 kgf*cm, 27 in.*lbf) 

   Fig 6: Identifying ECM Screws

   Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2. Connect the 4 ECM connectors [B].
3. Install the wire harness clamp [C].
   Fig 7: Locating ECM Connectors

   Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
4. Install the cover with the 2 clips.
   Fig 8: Installing Cover

   Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

HINT:

(See REGISTRATION )