Charging System: Generator: Installation

INSTALL GENERATOR ASSEMBLY
1. Install the generator assembly with the 2 bolts.
  Torque: 43 N*m (438 kgf*cm, 32 ft.*lbf)
  
  Fig 1: Identifying Generator Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the wire harness clamp bracket with the 2 bolts.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
  
  Fig 2: Identifying Wire Harness Clamp Bracket
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the wire harness.
  1. Connect the wire harness to terminal B and install the nut.
    Torque: 10 N*m (100 kgf*cm, 7 ft.*lbf)
  2. Connect the connector to the generator assembly.
    
    Fig 3: Identifying Terminal Cap & Nut
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. Install the wire harness stay with the bolt.
    Torque: 5.8 N*m (59 kgf*cm, 51 in.*lbf)
    
    Fig 4: Identifying Wire Harness Stay
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FAN AND GENERATOR V BELT (See INSTALLATION )
INSTALL NO. 1 UNDER COVER SUB-ASSEMBLY (See INSTALLATION )
INSTALL V-BANK COVER (See INSTALLATION )
INSTALL BATTERY
Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf)