Charging System: Generator: Removal

REMOVE BATTERY
REMOVE V-BANK COVER (See REMOVAL )
REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY (See REMOVAL )
REMOVE FAN AND GENERATOR V BELT (See REMOVAL )
REMOVE GENERATOR ASSEMBLY
1. Disconnect the wire harness.
  1. Remove the bolt and wire harness stay.
    
    Fig 1: Identifying Wire Harness Stay
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. Disconnect the connector from the generator assembly.
  3. Remove the terminal cap and nut.
    
    Fig 2: Identifying Terminal Cap & Nut
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. Disconnect the wire harness from terminal B.
2. Remove the 2 bolts, then separate the wire harness clamp bracket from the generator assembly.
  
  Fig 3: Identifying Wire Harness Clamp Bracket
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 2 bolts, then remove the generator assembly.
  
  Fig 4: Identifying Generator Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002