Ignition Coil: Installation

INSTALL IGNITION COIL ASSEMBLY
1. For Bank 1:
  1. Install the 3 ignition coils with the 3 bolts.
    Torque: 10 N*m (102 kgf*cm, 7.4 ft.*lbf)
  2. Connect the 3 ignition coil connectors.
    
    Fig 1: Identifying Ignition Coils Bolts (Bank 1)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. For Bank 2:
  1. Install the 3 ignition coils with the 3 bolts.
    Torque: 10 N*m (102 kgf*cm, 7.4 ft.*lbf)
  2. Connect the 3 ignition coil connectors.
    
    Fig 2: Identifying Ignition Coils Bolts (Bank 2)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT VENTILATION HOSE
1. Connect the ventilation hose to the intake air surge tank.
  
  Fig 3: Identifying Ventilation Hose
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 SURGE TANK STAY (See INSTALLATION )
INSTALL OIL BAFFLE PLATE (See INSTALLATION )
INSTALL AIR CLEANER ASSEMBLY (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf)
INSPECT IGNITION TIMING (See ON-VEHICLE INSPECTION )
INSPECT ENGINE IDLING SPEED (See ON-VEHICLE INSPECTION )
INSTALL V-BANK COVER (See INSTALLATION )