LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> Land Cruiser >> Repair and Diagnosis >> Engine Performance >> Engine Control System (2UZ-FE) >> Accelerator Pedal Position Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Accelerator Pedal Position Sensor: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE ACCELERATOR PEDAL 
    1. Disconnect the accelerator pedal position sensor connector.
    2. Remove the 2 bolts and accelerator pedal.
    NOTE:
    • Do not drop or strike the accelerator pedal.
    • Do not disassemble the accelerator pedal.
    Fig 1: Locating Bolts And Accelerator Pedal
    G05196957Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals