Accelerator Pedal: Installation

INSTALL ACCELERATOR PEDAL ASSEMBLY
1. Install the accelerator pedal with the 2 bolts [A].
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
  
  Fig 1: Installing Accelerator Pedal Assembly With Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the accelerator position sensor connector [B].
CONNECT BATTERY NEGATIVE TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)