LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> Matrix Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control System (1ZZ-FE) >> Accelerator Pedal >> On-Vehicle Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

On-Vehicle Inspection

  1. INSPECT ACCELERATOR PEDAL ASSEMBLY 
    1. Inspect the voltage.
      1. Connect the intelligent tester to the DLC3.
        2. Fig 1: Connecting Intelligent Tester To DLC3
        G05232947Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      2. Turn the ignition switch to ON.
      3. Turn the intelligent tester ON.
      4. Select the menu items: DIAGNOSIS / ENHANCED OBD II / DATA LIST / ALL / ACCEL POS #1, ACCEL POS #2.
      5. Operate the accelerator pedal, then check that of the ACCEL POS #1 and ACCEL POS #2 values are within the specified values.

        ACCEL POS #1 

        ACCELERATOR PEDAL CONDITION AND SPECIFIED CONDITION

        Accelerator Pedal Condition Specified Condition
        Released 0.5 to 1.1 V
        Depressed 2.6 to 4.5 V

        ACCEL POS #2 

        ACCELERATOR PEDAL CONDITION AND SPECIFIED CONDITION

        Accelerator Pedal Condition Specified Condition
        Released 1.2 to 2.0 V
        Depressed 3.4 to 5.0 V

        If the result is not as specified, check the accelerator pedal, wire harness and ECM.

scientia non olet · About LEMON Manuals