LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> Matrix Base, Standard >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt >> Rear Seat Inner Belt Assembly >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rear Seat Inner Belt Assembly: Installation

  1. INSTALL REAR SEAT INNER BELT ASSEMBLY 
    1. Install the floor anchor and rear seat belt assembly inner with the bolt, as shown in the illustration.

      Torque: 41.2 N*m (420 kgf*cm, 30 ft.*lbf) 

      NOTE: Do not make the anchor part run onto the protruding part of the floor panel.
  2. INSTALL REAR SEAT CUSHION ASSEMBLY AND REAR SEATBACK ASSEMBLY 
  3. INSTALL DECK TRIM COVER REAR 
  4. INSTALL BACK DOOR WEATHERSTRIP 
  5. INSTALL LUGGAGE COMPARTMENT TRAY 
  6. INSTALL DECK FLOOR BOX REAR 
  7. INSTALL DECK BOARD SUB-ASSEMBLY 
  8. INSTALL DECK BOARD NO. 2 
  9. INSTALL TONNEAU COVER ASSEMBLY 
  10. INSTALL REAR DOOR OPENING TRIM LH 
  11. INSTALL REAR DOOR OPENING TRIM RH 
  12. INSTALL REAR DOOR SCUFF PLATE LH 
  13. INSTALL REAR DOOR SCUFF PLATE RH 
    Fig 1: Installing Floor Anchor And Rear Seat Belt Assembly Inner With Bolt
    G05236685Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals