Front Stabilizer Bar: Inspection

INSPECT FRONT STABILIZER LINK ASSEMBLY
1. As shown in the illustration, flip the ball joint stud back and forth 5 times, before installing the nut.
2. Using a torque wrench, turn the nut continuously at a rate of 2 - 4 seconds per 1 turn and take the torque reading on the 5th turn.
  Torque: Turning torque
  
  0.05 to 1.96 N*m (0.5 to 20 kgf*cm, 0.4 to 17 in.*lbf)
  
  Fig 1: Flipping Ball Joint Stud Back And Forth
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002