Inspection Procedure

RESET POWER WINDOW REGULATOR MOTOR FRONT LH (DRIVER SIDE)
1. Reset the power window regulator motor (see INITIALIZATION ).
2. Check if the power window AUTO UP / DOWN function operates normally.
  OK : AUTO UP / DOWN function operates normally.
NG : OTHER PROBLEM

OK : GO TO NEXT STEP
CHECK JAM PROTECTION FUNCTION OPERATING RANGE
1. Check that the jam protection function operates normally (see DIAGNOSIS SYSTEM ).
  HINT:
  
  The jam protection function does not operate from the fully closed position of the door glass to 4 mm (0.16 in.) below that.
  
  OK : Jam protection function operates normally.
NG : REPLACE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY

OK : END