Inspection Procedure
- CHECK CAN COMMUNICATION SYSTEM
- Check if a CAN communication system DTC is output (See PROBLEM SYMPTOMS TABLE
)
.
Result
DTC RESULT REFERENCEResult Proceed to DTC is not output A DTC is output B
B: REPAIR CAN COMMUNICATION SYSTEM
A: Go to next step
- Check if a CAN communication system DTC is output (See PROBLEM SYMPTOMS TABLE
)
.
- CHECK MULTIPLEX COMMUNICATION SYSTEM
- Check if a multiplex communication system DTC is output (See DTC CHECK / CLEAR
)
.
Result
DTC RESULT REFERENCEResult Proceed to DTC is not output A DTC is output B
B: REPAIR MULTIPLEX COMMUNICATION SYSTEM
A: REPAIR OR REPLACE COMBINATION METER ASSEMBLY
- Check if a multiplex communication system DTC is output (See DTC CHECK / CLEAR
)
.