Inspection Procedure
NOTE:
When replacing the skid control ECU, perform initialization of linear solenoid valve and calibration (see INITIALIZATION
).
- CHECK DTC (HYBRID CONTROL SYSTEM)
- Check if a hybrid control system DTC is output (See DTC CHECK / CLEAR
)
.
Result
DTC RESULT REFERENCEResult Proceed to DTC is not output A DTC is output B
B: REPAIR HYBRID CONTROL SYSTEM
A: Go to Next Step
- Check if a hybrid control system DTC is output (See DTC CHECK / CLEAR
)
.
- CHECK DTC (ELECTRONICALLY CONTROLLED BRAKE SYSTEM)
- Check if C1300/- is output.
Result
DTC RESULT REFERENCEResult Proceed to C1300/-is not output A C1300/-is output B
B: Go to DTC C1300
A: REPLACE SKID CONTROL ECU
- Check if C1300/- is output.