LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> Prius Base >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> Camshaft Position Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Position Sensor: Removal

  1. REMOVE RADIATOR SUPPORT OPENING COVER (See  REMOVAL   ) 
  2. REMOVE ENGINE UNDER COVER LH 
  3. REMOVE ENGINE UNDER COVER RH 
  4. DRAIN ENGINE COOLANT (See  ON-VEHICLE INSPECTION  )  
  5. DRAIN HV COOLANT (See  ON-VEHICLE INSPECTION  )  
  6. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  7. REMOVE INVERTER WITH CONVERTER 
    1. Remove the inverter with converter (See REMOVAL ) .
  8. REMOVE CAMSHAFT POSITION SENSOR 
    1. Disconnect the sensor connector.
    2. Remove the bolt and sensor.
scientia non olet · About LEMON Manuals