LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> Prius Base >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> Camshaft Timing Oil Control Valve Assembly >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Timing Oil Control Valve Assembly: Installation

  1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY 
    1. Apply a light coat of engine oil to a new O-ring, then install it to the camshaft timing oil control valve.
    2. Install the camshaft timing oil control valve with the bolt.

      Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf) 

      NOTE: Be careful that the O-ring is not cracked or jammed when installing it.
    3. Connect the camshaft timing oil control valve connector.
      Fig 1: Identifying O-Ring To Camshaft Timing Oil Control Valve
      G05188989Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL AIR CLEANER ASSEMBLY (See  INSTALLATION   ) 
  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  4. CHECK FOR ENGINE OIL LEAKS 
  5. INSTALL RADIATOR SUPPORT OPENING COVER (See  INSTALLATION   ) 
  6. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
scientia non olet · About LEMON Manuals