Typical Malfunction Thresholds
TYPICAL MALFUNCTION THRESHOLDS
| Either of the following conditions is met: | 1 or 2 |
| 1. Frequency that both of following conditions (a) and (b) are met: | 5 times or more |
| (a) Engine rpm-Target rpm | Less than -100 rpm, or 150 rpm or more |
| (b) Vehicle condition | Stop after vehicle was driven by 6.25 mph (10 km/h) or more |
| 2. Frequency that both of following conditions (c) and (d) are met: | Once |
| (c) Engine rpm-Target rpm | Less than -100 rpm, or 150 rpm or more |
| (d) IAC flow rate learning value | 0.6 L/sec. or less, L/sec. or more |