LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> Prius Base >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Control System >> Camshaft Position Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Position Sensor: Installation

  1. INSTALL CAMSHAFT POSITION SENSOR 
    1. Install the sensor with the bolt.

      Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf) 

    2. Connect the sensor connector.
  2. INSTALL INVERTER WITH CONVERTER 
    1. Install the inverter with converter (See INSTALLATION ) .
  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  4. ADD HV COOLANT (See  ON-VEHICLE INSPECTION  )  
  5. ADD ENGINE COOLANT (See  ON-VEHICLE INSPECTION  )  
  6. CHECK FOR ENGINE COOLANT LEAKS (See  ON-VEHICLE INSPECTION  )  
  7. CHECK FOR HV COOLANT LEAKS 
  8. INSTALL RADIATOR SUPPORT OPENING COVER (See  INSTALLATION   ) 
  9. INSTALL ENGINE UNDER COVER RH 
  10. INSTALL ENGINE UNDER COVER LH 
  11. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
scientia non olet · About LEMON Manuals