LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> Prius Base >> Repair and Diagnosis >> General Information >> Identification >> Introduction >> Repair Instruction >> Customize Parameters
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Customize Parameters

HINT:

The following items can be customized.

NOTE:
  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Be sure to make a note of the current settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to the default setting.
  1. AIR CONDITIONING SYSTEM 

    Air conditioning amplifier 

    AIR CONDITIONING AMPLIFIER SPECIFICATIONS

    Display (Item) Default Contents Setting
    SET TEMP SHIFT (Set Temperature Shift) NORMAL To control with the shifted temperature against the display temperature. +2C / +1C / NORMAL / -1C / -2C
    AIR INLET MODE (Air Inlet Mode) AUTO In case of turning the A/C ON when you desire to make the compartment cool down quickly, this is the function to change the mode automatically to RECIRCULATED mode. MANUAL/AUTO
    COMPRESSOR MODE (Compressor Mode) AUTO Function to turn the A/C ON automatically by pressing the AUTO button when the blower is ON and the A/C is OFF. MANUAL/AUTO
    COMPRS/DEF OPER (Compressor/Air inlet DEF operation) LINK Function to turn the A/C ON automatically linking with the FRONT DEF button when the A/C is OFF. NORMAL / LINK
    FOOT/DEF MODE (Foot/DEF auto mode) ON Function to turn the air flow from FOOT/DEF to ON automatically when AUTO MODE is ON. OFF / ON
    AUTO BLOW UP (Foot/DEF automatic blow up function) ON Function to switch the blower level automatically when the defroster is ON. OFF / ON
    FOOT AIR LEAK (Foot air leak) ON Function to cut off the airstream felt underfoot while the vehicle is moving. OFF / ON
    AMBINT TMP SFT (Ambient Temperature Shift) NORMAL To control with the shifted ambient temperature against the display ambient temperature. +3C / +2C / +1C / NORMAL / -1C / -2C / -3C
  2. THEFT DETERRENT SYSTEM 

    Theft deterrent system: 

    THEFT DETERRENT SYSTEM SPECIFICATIONS

    Display (Item) Default Contents Setting
    PASSIVE MODE (Passive arming mode) OFF PASSIVE MODE is a function that switches theft deterrent system from arming preparation state to armed state 30 seconds after key is removed from key slot and all doors is closed, even if doors are not locked by wireless or door key lock operation.
    In PASSIVE MODE, theft deterrent system will judge that a theft is taking place and switch to alarm sounding state if one of the following operations are not performed within 14 seconds (see ENTRY DELAY below) after door is opened:
    • Unlock any door by key or wireless operation
    • Reconnect battery
    • Insert key into key slot and turn power switch ON (IG)
    		 ON / OFF
    WARN BY HORN (Warning by horn) ON Function that allows vehicle horn and theft deterrent horn to be able to be used and a warning device ON / OFF
    ENTRY DELAY (Entry delay time) 14 s Function that changes entry delay time (time before warning states) 0 s/14 s/30 s
    WARN BY GLS SEN (Warning by glass broken sensor) ON Function that turns glass broken sensor ON/OFF ON / OFF
  3. LIGHTING SYSTEM 

    Illuminated entry 

    LIGHTING SYSTEM SPECIFICATIONS

    Display (Item) Default Contents Setting
    LIGHTING TIME 15 s Changes lighting time after closing doors (light quickly fades out when power switch is turned ON (IG) 7.5 s/15 s/30 s
    I/L AUTO OFF ON Illumination AUTO OFF ON function to turn off interior light automatically after specified time for prevent the battery loss when the interior light switch is "DOOR" position and the door is open ON / OFF
    I/L ON/UNLOCK ON Function to light interior light, etc. when the door is unlocked with a transmitter, door key or door lock control switch ON / OFF
    I/L ON/ACC OFF ON Illuminates interior light when power switch is turned from the ON (ACC) to ON (IG) position ON / OFF

    Light control 

    LIGHT CONTROL SPECIFICATIONS

    Display (Item) Default Contents Setting
    SENSITIVITY NORMAL To adjust sensitivity of lighting illumination. Refer to LIGHT CONTROL SPECIFICATIONS  . LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
    DISP EX ON SEN NORMAL Changes brightness when lowering lights such as combination meter indicator light, A/C indicator light, and clock light. Refer to LIGHT CONTROL SPECIFICATIONS  . LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
    DISP EX OFF SEN NORMAL Changes brightness when lowering lights such as combination meter indicator light, A/C indicator light, and clock. Refer to LIGHT CONTROL SPECIFICATIONS  . LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
    DRL FUNCTION (•) ON ON / OFF of DRL function ON/OFF
    •: w/ Daytime running light

    Illustration of *1 

    LIGHT CONTROL SPECIFICATIONS

    Brightness of lowering the lights Dark ↔ Bright
    Setting DARK2 - DARK1 - NORMAL - LIGHT1 - LIGHT2

    Illustration of *2 

    LIGHT CONTROL SPECIFICATIONS

    Brightness when canceling the lowering of the lights Dark ↔ Bright
    Setting DARK2 - DARK1 - NORMAL - LIGHT1 - LIGHT2

    Illustration of *3 

    LIGHT CONTROL SPECIFICATIONS

    Lighting brightness Dark ↔ Bright
    Setting DARK2 - DARK1 - NORMAL - LIGHT1 - LIGHT2
  4. WIRELESS DOOR LOCK CONTROL SYSTEM (with Smart Key System) 

    Wireless door lock control system: 

    WIRELESS DOOR LOCK CONTROL SYSTEM SPECIFICATIONS

    Display (Items) Default Contents Setting
    OPEN DOOR WARN (Door ajar warning function ON If door is not completely closed and transmitter LOCK switch is pressed, this function sounds buzzer for 10 seconds ON / OFF
    WIRLS BUZZ OPER (Buzzer answer-back for wireless door lock operation) ON Function that makes wireless buzzer sound for answer-back when transmitter LOCK/UNLOCK switch is pressed ON / OFF
    ALARM FUNCTION (Panic function) ON Function that operates theft deterrent alarm when transmitter PANIC switch transmitter is held 0.8 seconds. ON / OFF
    UNLOCK/2OPER (Wireless unlock operated twice) ON Function that unlocks driver side door when UNLOCK switch on transmitter is pressed once, and unlocks all doors when pressed twice. If set to OFF, pressing UNLOCK switch once unlocks all doors. ON / OFF
    AUTO LOCK DELAY (Auto lock time) 30s This function controls amount of time from unlocking doors to automatic re-locking function 30s / 60s
    HAZARD ANS BACK (Hazard answer-back for wireless door lock operation) ON When LOCK switch on transmitter is pressed, this function illuminates all hazard warning lights once. When UNLOCK switch is pressed, all hazard warning lights illuminate twice ON / OFF
  5. WIRELESS DOOR LOCK CONTROL SYSTEM (without Smart Key System) 

    Wireless door lock control system: 

    WIRELESS DOOR LOCK CONTROL SYSTEM SPECIFICATIONS

    Display (Items) Default Contents Setting
    OPEN DOOR WARN (Door ajar warning function ON If door is not completely closed and transmitter LOCK switch is pressed, this function sounds buzzer for 10 seconds ON / OFF
    ALARM FUNCTION (Panic function) ON Function that operates theft deterrent alarm when transmitter PANIC switch is held 0.8 seconds. ON / OFF
    UNLOCK/2OPER (Wireless unlock operated twice) ON Function that unlocks driver side door when UNLOCK switch on transmitter is pressed once, and unlocks all doors when pressed twice. If set to OFF, pressing UNLOCK switch once unlocks all doors. ON / OFF
    AUTO LOCK DELAY (Auto lock time) 30s This function controls amount of time from unlocking doors to automatic re-locking function 30s / 60s
    HAZARD ANS BACK (Hazard answer-back for wireless door lock operation) ON When LOCK switch on transmitter is pressed, this function illuminates all hazard warning lights once. When UNLOCK switch is pressed, all hazard warning lights illuminate twice ON / OFF
  6. SMART KEY SYSTEM 

    Smart key system 

    SMART KEY SYSTEM SPECIFICATIONS

    Display (Item) Default Contents Setting
    SMART WARN 1 (Warns if key is taken from D-door with P position) ON Function that warns driver that key is taken out from driver's door when shift position is P and power switch is not OFF ON / OFF
    SMART WARN 2 (Warns if key is taken from D-door without P position) ON Function that warns driver that key is taken out from driver's door when shift position is not P and power switch is not OFF ON / OFF
    SMART WARN 3 (Warns if key is taken out by other passengers) ON Function that warns driver that key is taken out from front passenger's door by passenger when power switch is not OFF ON / OFF
    SMART BUZ NUM (Sets number of warning buzzer sounds) 3 TIMES Function that sets number of warning buzzer sounds when key is taken out of vehicle OFF / 3TIMES / 5TIMES / 7TIMES
    SMART WARN 4 (Warning time for locking door when engine is idling) 2s Function that sets warning time for locking doors while engine is idling OFF / 1s / 2s
    SMART WARN 5 (Warning when key is left in vehicle) 2s Function that sets warning time for locking doors while key is inside vehicle OFF / 1s / 2s
    SMART WARN 6 (Warning if starting engine when key is out of detection range) ON Function that warns driver that entry ignition control is being attempted to be activated while key is out of detection range ON / OFF
    KEY LOW-BATT WRN (Warning when key battery becomes weak) ON Function that warns driver that key's battery power is low ON / OFF
    SMART UNLOCK (Entry door unlock mode) EACH Function that makes entry unlock operation available. ALL / EACH / D-door
    TRANSMIT INTVAL (Transmission interval) 0.3s Function that sets entry signal transmission intervals when vehicle is stopped and key is outside vehicle 0.15s / 0.3s / 0.45s / 0.6s
    PARK WAIT TIME (Waiting time to permit door opening of door after locking) 3.0s Function that sets waiting time to permit opening door after door is locked with entry lock function 0.5s / 1.5s / 2.5s / 5s
    SMART BACK DOOR (Back door opening operation when vehicle is locked) LONG Function that enables back door to open when key is inside luggage room LONG / TWICE / OFF
  7. METER / GAUGE SYSTEM 
    NOTE: Basically, these buzzers should be set on for safety driving. However, only if it is necessary to set the buzzer off for some reason, perform the following procedures.

    Procedure 

    GAUGE SYSTEM SPECIFICATIONS

    Steps Back-up Warning Buzzer Driver's Seat Belt Buzzer Front Passenger's Seat Belt Buzzer
    1 Turn power switch ON (IG) Turn power switch ON (IG) Turn power switch ON (IG)
    2 Press ODO / TRIP switch until odometer displays "ODO" Press ODO / TRIP switch until odometer displays "ODO" Press ODO / TRIP switch until odometer displays "ODO"
    3 Turn power switch OFF Turn power switch OFF Turn power switch OFF
    4 Turn power switch ON (IG) while depressing brake pedal. Check that combination meter displays "READY" Turn power switch ON (IG) while depressing brake pedal. Check that combination meter displays "READY" Turn power switch ON (IG) while depressing brake pedal. Check that combination meter displays "READY"
    5 After turning power switch ON (IG), press ODO / TRIP switch within 6 seconds, and hold it down for 10 seconds or more After turning power switch ON (IG), press ODO / TRIP switch within 6 seconds, and hold it down for 10 seconds or more. Sit in front passenger seat. After turning the power switch ON (IG), press ODO / TRIP switch within 6 seconds, and hold it down for 10 seconds or more.
    6 Continue holding down ODO / TRIP switch, move shift lever to R and press P switch Continue holding down ODO / TRIP switch, fasten driver seat belt Continue holding down ODO / TRIP switch, fasten front passenger seat belt
    7 Check that odometer displays either "b-on" or "b-off"* Check that odometer displays either "b-on" or "b-off"* Check that odometer displays either "b-on" or "b-off"*
    8 Press ODO / TRIP switch to change display to "b-off"* Press ODO / TRIP switch to change display to "b-off' Press ODO / TRIP switch to change display to "b-off"
    9 Turn power switch OFF Turn power switch OFF Turn power switch OFF
    10 Turn power switch ON (IG) while depressing brake pedal. Check that combination meter displays "READY" Turn power switch ON (IG) while depressing brake pedal. Check that combination meter displays "READY" Turn power switch ON (IG) while depressing brake pedal. Check that combination meter displays "READY"
    11 Check that no buzzer sounds when shift lever is in "R" Check that no buzzer sounds Check that no buzzer sounds when sitting on front passenger seat
    HINT:
    *: "b-off" indicates that the buzzer is OFF. "b-on" indicates that the buzzer is ON. The buzzer cancel setting will be finished (the odometer will display "ODO") if the ODO / TRIP switch is not operated for 10 seconds or more. In this case, perform step 11 to check that buzzer cancel setting is complete. If it is not complete, start from step 1 again.
    NOTE: When either the battery cable or the combination meter connector is disconnected, these buzzers are set on.
scientia non olet · About LEMON Manuals