LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> FJ Cruiser 4WD, Part Time >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Control System >> Knock Sensor >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Knock Sensor: Inspection

  1. INSPECT KNOCK SENSOR 
    1. Check the resistance.
      1. Using an ohmmeter, measure the resistance between the terminals.

        Standard resistance 

        STANDARD RESISTANCE

        Tester Connection Specified Condition
        1 (Ground) - 2 (Output) 120 to 180 kΩ at 20°C (68°F)
        Fig 1: Identifying Resistance Between Terminals
        G05198023Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        If the result is not as specified, replace the knock sensor.

scientia non olet · About LEMON Manuals