Inspection Procedure

READ OUTPUT DTC (DTC P0630)

Result

Connect a Techstream to the DLC3.
Turn the ignition switch ON and turn the tester ON.
Select the following menu items: Powertrain / Engine and ECT / Trouble Codes.

Read DTCs.

Result

RESULT REFERENCE

Display (DTC Output)	Proceed To
P0630	A
P0630 and other DTCs	B

If any DTCs other than P0630 are output, troubleshoot those DTCs first.

NOTE: If P0630 is set, the VIN must be input to the ECM using a Techstream. However, all DTCs are cleared automatically by the tester when inputting the VIN. If DTCs other than P0630 are set, check them first.

B: GO TO DTC CHART (See DIAGNOSTIC TROUBLE CODE CHART )

A: Go to Next Step

INPUT VIN WITH TECHSTREAM
Refer to REGISTRATION .

NEXT END