Front Passenger Side Power Window Switch: Inspection
- INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
RESISTANCE REFERENCETester Connection Switch Condition Specified Condition 6 (UP) - 1 (GND) Manual up operation Below 1 Ω 7 (DOWN) - 1 (GND) Manual down operation Below 1 Ω 8 (AUTO) -1 (GND) Auto up/down operation Below 1 Ω If the result is not as specified, replace the power window regulator switch assembly.
- Check that the LED illuminates.
- Apply battery voltage to the power window regulator switch and check that the LED illuminates.
OK
POWER WINDOW CONDITION CHARTMeasurement Condition Specified Condition Battery positive (+) → 4 (LED)
Battery negative (-) → 1 (GND)LED illuminates If the result is not as specified, replace the power window regulator switch assembly.
- Apply battery voltage to the power window regulator switch and check that the LED illuminates.
- Measure the resistance according to the value(s) in the table below.