Rear Power Window Switch: Removal

HINT:

• Use the same procedures for the LH side and RH side.
• The procedures listed below are for the LH side.

1. REMOVE REAR DOOR ARMREST BASE PANEL ASSEMBLY 
   1. Using a moulding remover, detach the 7 claws.
   2. Disconnect the connector and remove the armrest base panel.
      Fig 1: Identifying Armrest Base Panel & Claws

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY 
   1. Detach the 2 claws and remove the regulator switch.
      Fig 2: Identifying Regulator Switch & Claws

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002