LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> Land Cruiser >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control/Dynamic Control Systems >> Crawl Switch >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Crawl Switch: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION  (See REMOVAL )
  3. REMOVE LOWER INSTRUMENT PANEL PAD SUBASSEMBLY LH  (See REMOVAL )
  4. REMOVE NO. 1 INSTRUMENT PANEL FINISH CUSHION  (See REMOVAL )
  5. REMOVE LOWER INSTRUMENT PANEL PAD SUBASSEMBLY RH  (See REMOVAL )
  6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY  (See REMOVAL )
  7. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY  (See REMOVAL )
  8. REMOVE REAR UPPER CONSOLE PANEL SUBASSEMBLY  (See REMOVAL )
  9. REMOVE CONSOLE CUP HOLDER BOX SUB-ASSEMBLY  (See REMOVAL )
  10. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY  (See REMOVAL )
  11. REMOVE SUSPENSION CONTROL SWITCH (CRAWL SWITCH) 
    1. Disconnect the connector.
    2. Detach the 4 claws and remove the suspension control switch (CRAWL switch) from the upper console panel.
    Fig 1: Locating Suspension Control Switch
    G05630000Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals