LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> Land Cruiser >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control/Dynamic Control Systems >> VSC Off Switch >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

VSC Off Switch: Removal

  1. REMOVE FRONT DOOR SCUFF PLATE LH  (See REMOVAL )
  2. REMOVE COWL SIDE TRIM BOARD LH  (See REMOVAL )
  3. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  (See REMOVAL )
  4. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL  (See REMOVAL )
  5. REMOVE VSC OFF SWITCH 
    1. Disconnect the VSC OFF switch connector.
    2. Using a screwdriver, detach the 2 claws and remove the VSC OFF switch from the lower instrument panel finish panel.

      HINT:

      Tape the screwdriver tip before use.

    Fig 1: Detaching Claws
    G05629995Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals