Inspection Procedure

1. Check tire size and condition of all 4 wheels.

   OK: Condition of all 4 wheels is normal and tire size is same. 

NG: REPLACE TIRES SO THAT ALL 4 TIRES ARE SAME SIZE 

OK: Go to Next Step 

1. Check the front speed sensor rotors (See DTC C0200/31 FRONT SPEED SENSOR RH CIRCUIT; DTC C0205/32 FRONT SPEED SENSOR LH CIRCUIT: DTC C1235/35 FOREIGN OBJECT IS ATTACHED ON TIP OF FRONT SPEED SENSOR RH: DTC C1236/36 FOREIGN OBJECT IS ATTACHED ON TIP OF FRONT SPEED SENSOR LH  ) and rear speed sensor rotors (See DTC C0210/33 REAR SPEED SENSOR RH CIRCUIT: DTC C0215/34 REAR SPEED SENSOR LH CIRCUIT: DTC C1238/38 FOREIGN OBJECT IS ATTACHED ON TIP OF REAR SPEED SENSOR RH: DTC C1239/39 FOREIGN OBJECT IS ATTACHED ON TIP OF REAR SPEED SENSOR LH ).

   Result 

   RESULT REFERENCE
   
   

   Result		Proceed to
   OK		A
   NG	Front speed sensor	B
   	Rear speed sensor	C

B: REPLACE FRONT AXLE HUB SUBASSEMBLY (SPEED SENSOR ROTOR)  (See REMOVAL )

C: REPLACE REAR AXLE HUB AND BEARING ASSEMBLY (SPEED SENSOR ROTOR)  (See DISASSEMBLY )

A: Go to Next Step 

1. Check the front speed sensor circuit (See DTC C0200/31 FRONT SPEED SENSOR RH CIRCUIT; DTC C0205/32 FRONT SPEED SENSOR LH CIRCUIT: DTC C1235/35 FOREIGN OBJECT IS ATTACHED ON TIP OF FRONT SPEED SENSOR RH: DTC C1236/36 FOREIGN OBJECT IS ATTACHED ON TIP OF FRONT SPEED SENSOR LH  ) and rear speed sensor circuit (See DTC C0210/33 REAR SPEED SENSOR RH CIRCUIT: DTC C0215/34 REAR SPEED SENSOR LH CIRCUIT: DTC C1238/38 FOREIGN OBJECT IS ATTACHED ON TIP OF REAR SPEED SENSOR RH: DTC C1239/39 FOREIGN OBJECT IS ATTACHED ON TIP OF REAR SPEED SENSOR LH ).

   Result 

   RESULT REFERENCE
   
   

   Result		Proceed to
   OK		A
   NG	Front speed sensor	B
   	Rear speed sensor	C

B: REPLACE FRONT SPEED SENSOR  (See FRONT SPEED SENSOR  )

C: REPLACE REAR SPEED SENSOR  (See REAR SPEED SENSOR  )

A: Go to Next Step 

1. Check the front speed sensor circuit (See DTC C0200/31 FRONT SPEED SENSOR RH CIRCUIT; DTC C0205/32 FRONT SPEED SENSOR LH CIRCUIT: DTC C1235/35 FOREIGN OBJECT IS ATTACHED ON TIP OF FRONT SPEED SENSOR RH: DTC C1236/36 FOREIGN OBJECT IS ATTACHED ON TIP OF FRONT SPEED SENSOR LH  ) and rear speed sensor circuit (See DTC C0210/33 REAR SPEED SENSOR RH CIRCUIT: DTC C0215/34 REAR SPEED SENSOR LH CIRCUIT: DTC C1238/38 FOREIGN OBJECT IS ATTACHED ON TIP OF REAR SPEED SENSOR RH: DTC C1239/39 FOREIGN OBJECT IS ATTACHED ON TIP OF REAR SPEED SENSOR LH ).

NG: REPAIR OR REPLACE HARNESS OR CONNECTOR 

OK: Go to Next Step 

1. Clear the DTCs (See DTC CHECK/CLEAR  ).
2. Drive the vehicle at a speed of approximately 32 km/h (20 mph) or more for 60 seconds or more.
3. Check if the same DTCs are output (See DTC CHECK/CLEAR  ).

   HINT:

   Reinstall the sensors, connectors, etc. and restore the previous vehicle conditions before rechecking for DTCs.

   Result 

   RESULT REFERENCE
   
   

   Result	Proceed to
   DTC is output	A
   DTC is not output	B

B: USE SIMULATION METHOD TO CHECK  (See HOW TO PROCEED WITH TROUBLESHOOTING )

A: REPLACE MASTER CYLINDER SOLENOID  (See DISASSEMBLY )